416-562-4856

1990 Custom Ted Brewer 33 Mistral sailboat with single inboard diesel power...

Very nicely equipped "go- anywhere" cutter with full enclosure, new Yanmar 3GM engine, dinghy, outboard and lots of extras.
Very impressive construction for a custom metal boat...she looks like a fiberglass boat at first glance.
The stringer gridwork and welding is impeccable.

The boat is clean and very well maintained.

Patience V is an aluminum Ted Brewer designed cutter-rigged sloop. She is a radius bilge aluminum-hulled yacht designed for cruising comfort and performance. In fact, Patience V was so well constructed that she is often mistaken as a fiberglass vessel. She was launched in 1990 with offshore sailing in mind and has spent all but one year of her life in freshwater.

Construction is extremely solid with closely spaced longitudinal stringers on widely spaced athwartship frames. This forms an extremely strong grid to resist collisions or grounding.

She boasts a beautiful Herreshoff-style interior finished in gorgeous mahogany. Her accommodations offer ample room for the cruising family or for a couple with guests. Storage is generous and the necessities, such as a roomy head, a wet locker and a good navigation area, have not been forgotten. The spacious U-shaped galley features a deep sink, large refrigerator and ample stowage for dishes and supplies. A fixed, drop-leaf cabin table has good seating for the crew and additional storage for cutlery, condiments, etc.

The deep cockpit gives good protection to the crew in adverse weather and wide side decks offer a safe working platform for when the weather is less than pleasant. Her moderate sloop rig provides drive for the long waterline hull. Below water, the fin keel and skeg-hung rudder assures good windward ability. Her generous beam, firm bilges and a solid ballast ratio supply the necessary stability so she can stand up to a good breeze.

All in all, the cruisers who are looking for a good performing aluminum cruiser would do well to consider Patience V.

General Equipment
8 Opening vents
Anchor 1 - Bruce
Anchor 2 - CQR
Anchor Chain- 300 feet
Rode – 200 feet
Anchor Windlass – High Speed Manual
Batteries – 1 starter and 4 Trojan T-105’s
Battery Charger
Battery Parallel Switch
# of Bilge Blowers - 1
# of Bilge Manual Pumps - 1
# of Bilge Electric Pumps - 1
Alternator Info – 2 high output in-line
Boarding Ladder – 7 feet folding
Bow Rail
Bow Roller
Cabin Curtains
Cabin Heater - Built-In Diesel
Clock and Barometer
Cradle
Cockpit Table
10’ Zodiac Dinghy
8 hp Dinghy Outboard
Fenders - 4
Head - Manual
Pressured Water
Screens on Hatches and Ports
Shore Power Inlets: 1 30 Amps
Shore Power Cord Length: 35 feet
Spare Prop
Teak & Holly Cabin Sole

Galley